The DeFix Premium Complete package costs 450 lei: a full clean of the cooling system, Honeywell PTM7950 on the CPU and GPU, and Laird Tputty 607 on the VRM and video memory. It is for laptops, workstations and PCs that run heavy loads for hours: gaming on an RTX 4060 or higher, Ryzen or Intel H/HX CPUs, video editing, rendering and local AI. We work at Calea Șerban Vodă 43, sector 4, Bucharest. It takes up to 3 hours and comes with a 3-month warranty.
We reply within 2–3 hours, Mon–Fri 09:00–18:00 and Sat 09:00–13:00.
CPU, GPU, GPU hotspot and video memory (where the sensor exists), plus clocks and power draw, in a combined stress test.
Heatsinks, heat pipes, fans and the contact plates for VRAM and VRM.
Dust, lint and old material, including the hardened old pads on the memory and VRM.
Cut to fit each chip, without air bubbles.
Dosed to fill the gap up to the heatsink without lifting the heatsink off the CPU or GPU.
Screws are tightened in the specified order so the pressure is even on both chips.
We repeat the stress test until PTM7950 settles and give you the before and after temperatures for each component.
Honeywell PTM7950 is a phase change material, not a paste. At room temperature it is a thin solid pad; when the chip heats up (around 45 °C, according to the specifications) it softens and fills the microscopic gaps between the chip and the heatsink. Thermal conductivity 8.5 W/m·K and thermal impedance 0.04–0.08 °C·cm²/W, according to the manufacturer. Electrically non-conductive. It does not pump out from the chip under repeated heating and cooling, as pastes do on gaming laptops.
Laird Tputty 607 is a thermal putty (a silicone gap filler), not a phase change material – it stays soft and pliable. Thermal conductivity 6.4 W/m·K, according to the Laird datasheet. Memory chips and VRM parts have slightly different heights; a fixed-thickness pad doesn’t touch all of them well, and one that is too thick lifts the heatsink off the CPU. Putty adapts to each gap without high pressure on the board.
Liquid metal conducts electricity and attacks aluminium. On laptops with a powerful GPU, a stray drop near the small components around the GPU means a dead motherboard. The gain over PTM7950 is a few degrees and does not justify the risk. For laptops with factory liquid metal, we tell you on arrival what we recommend.
| Standard | Premium | ★ Premium Complete | |
|---|---|---|---|
| Price | 250 lei | 350 lei | 450 lei |
| Time | up to 3 hours | up to 3 hours | up to 3 hours |
| Warranty | 3 months | 3 months | 3 months |
| Full cleaning of the cooling system | ✓ | ✓ | ✓ |
| CPU and GPU | Arctic MX-6 / MX-7 paste | Honeywell PTM7950 (phase change) or Arctic MX-6 / MX-7 paste | Honeywell PTM7950 (phase change) |
| VRM and video memory (VRAM) | – | Laird Tputty 607 (thermal putty), if you choose this option instead of PTM7950 | Laird Tputty 607 (thermal putty) |
| Desktop PC | ✓ same price | ✓ same price | ✓ same price |
| Best for | office, school, everyday use | gaming laptops | high-end gaming (RTX 4060+), video editing, rendering, local AI |
| Page | See Standard | See Premium | this page |
Fixed prices, materials included. If we find another fault (for example a worn fan), we ask you before doing any extra work.
Premium Complete is also 450 lei for a gaming PC or a desktop workstation: a full clean of the case and cooling, PTM7950 on the CPU and the GPU die, Tputty 607 on the VRM and video memory. Ideal for PCs that render, edit or run AI models for hours.
There is a lot of counterfeit PTM7950 on the market, especially on AliExpress, Temu and in cheap listings. A fake pad can cool worse than ordinary paste – that is where many “PTM7950 didn’t help” forum posts come from. There is no reliable visual sign: neither the colour, nor the thickness, nor a printed “certificate” proves it is genuine. The only real guarantee is where the material comes from.
We use only original, fresh consumables, straight from the manufacturer. If you like, we show you the packaging of the material before we fit it.
Fill in the fields. WhatsApp opens with the message ready – you just press “Send”.
We reply within 2–3 hours, Mon–Fri 09:00–18:00 and Sat 09:00–13:00. If you don’t use WhatsApp, call 0750 434 644.
Google reviews for DeFix, Calea Șerban Vodă 43 (most are in Romanian).
If you have an RTX 4060 or higher and use the laptop for hours under load, Premium Complete is the right choice: it covers the CPU, the GPU and the video memory. For an average gaming laptop used a few hours a week, Premium is usually enough. We recommend the option after measuring on arrival.
On laptops, thermal putty usually fits better. Memory chips have slightly different heights, and putty fills each gap without lifting the heatsink. Pads only work well if they have exactly the right thickness for every chip.
No. Tputty 607 is a thermal putty: it stays soft and pliable and does not change state when heated. The phase change material in the package is PTM7950, used only on the CPU and the GPU.
GDDR6 and GDDR7 memory runs at high temperatures in games and AI workloads, and contact with the heatsink is made through pads or putty. If the pads have hardened or don’t touch the chip properly, the memory overheats and the GPU lowers its clock. Replacing them with putty usually solves it.
Yes. Long workloads keep the GPU and memory at full load for hours – exactly when ordinary pastes degrade and old pads can’t cope. With lower temperatures the GPU holds its clock, so rendering or generation runs faster and more consistently.
Between 0 and 3 hours, including full disassembly and PTM7950 burn-in, depending on the model. We tell you the exact time when you drop it off.
3 months, a written warranty for the work and the materials fitted.
No. We only work on the cooling system and don’t touch your SSD, Windows or programs.
Send us the model on WhatsApp, with an HWiNFO screenshot under load if you can. Book the drop-off before you come.
Or email us: electronice@defix.ro
We reply within 2–3 hours, Mon–Fri 09:00–18:00 and Sat 09:00–13:00.